HP 130A 8 Pack is a pack of 8 genuine HP toner cartridges from The Print Cartridge Shop, dispatched fast to every Australian state.
Two complete Genuine HP 130A sets, two each of CF350A, CF351A, CF352A and CF353A, give a compact colour LaserJet Pro MFP a fresh set now and another in reserve.
Key details
- HP cartridge number: 130A
- HP part numbers: CF350A, CF351A, CF352A, CF353A
- Colours: Black, Cyan, Magenta, Yellow
- Yield: rated to ISO/IEC 19798; actual pages depend on coverage
- Pack contents: 2 each Black, Cyan, Magenta, Yellow (8 cartridges)
- Genuine HP product
Suits the following printers
HP Color LaserJet Pro MFP M153, HP Color LaserJet Pro MFP M176n, HP Color LaserJet Pro MFP M177fw
Good to know
Is the HP 130A 8 Pack genuine?
Yes. The HP 130A 8 Pack is a genuine HP product and arrives new in its original packaging.
Is the drum built into the 130A?
Yes. Each 130A cartridge has the imaging drum built in, so there is no separate drum to buy.
Why does my MFP still say a colour is low after changing it?
Check the cartridge is fully seated and the door is closed firmly. Remove and refit the cartridge if the message stays.
How to install the HP 130A 8 Pack
- Open the front or top cover and let the printer cool for a few minutes if it has just been printing.
- Remove the used cartridge. On printers with a separate drum unit, take out the drum and toner together, then push the lock lever and lift the toner cartridge out of the drum.
- Unpack the new cartridge and gently rock it side to side five or six times to spread the toner evenly. Remove any protective strip or cover.
- Slide the cartridge into place (or into the drum unit until it clicks), refit the assembly and close the cover.
Storage and handling
Keep unopened cartridges in their packaging in a cool, dry place and lay them horizontally. If you spill toner, wipe it up with a dry cloth and cold water rather than a vacuum cleaner. Stored this way, an unopened HP 130A 8 Pack stays ready to use whenever you need it.
Getting the most from each cartridge
Page yields are measured at about 5% coverage, so pages with heavy graphics use toner faster. Printing in draft or toner save mode helps your cartridge last longer, and keeping the paper path clean helps avoid smudges.
Delivery, returns and support
Orders are packed within 1–2 business days and sent with tracking to every Australian state for a flat $19.99 delivery fee. Change your mind? Let us know within 30 days of delivery under our returns policy, and faulty items are covered by Australian Consumer Law. Not sure this is the right part for your machine? Send us your printer model and we will confirm before you order.













Reviews
There are no reviews yet