This refurbished Zebra ZT230 is a 203 dpi industrial thermal transfer label printer configured with USB and Ethernet. It suits warehouses, manufacturers and logistics teams that have outgrown a desktop printer but do not need a top-tier industrial model. Large roll capacity, a metal print mechanism and simple side loading keep labels moving through long shifts.
Key features
- Refurbished unit, 203 dpi (8 dots/mm) thermal transfer, also prints direct thermal
- Up to 152 mm/s (6 ips) print speed with a 104 mm print width
- Takes 203 mm label rolls on a 76 mm core and 450 m ribbons for fewer changeovers
- Side-loading metal print mechanism with head-open lock
- Clear bi-fold media door that needs less room on crowded benches
- USB 2.0 and Ethernet for direct or networked printing
- 128 MB flash and 128 MB RAM for stored formats, fonts and graphics
Technical specifications
| Condition | Refurbished |
|---|---|
| Print method | Thermal transfer and direct thermal |
| Resolution | 203 dpi (8 dots/mm) |
| Maximum print speed | 152 mm/s (6 ips) |
| Maximum print width | 104 mm (4.09 in) |
| Maximum print length | 3,988 mm at 203 dpi |
| Media width | 19.4 to 114 mm |
| Maximum roll size | 203 mm OD on 76 mm core; 152 mm OD on 25 mm core |
| Media thickness | 0.076 to 0.25 mm |
| Ribbon | 300 m or 450 m, 40 to 110 mm wide, 25.4 mm core, ink side out |
| Memory | 128 MB flash, 128 MB RAM |
| Languages | ZPL, ZPL II, XML; Link-OS |
| Dimensions (W x H x D) | 242 x 277 x 432 mm |
| Weight | 9.1 kg |
| Operating temperature | 5 to 40 °C (thermal transfer), 0 to 40 °C (direct thermal) |
Connectivity and software
This refurbished Zebra ZT230 is set up with USB and Ethernet. On the ZT230 platform, USB 2.0 and RS-232 serial are standard, while parallel, ZebraNet 10/100 Ethernet and 802.11 a/b/g/n wireless are factory or field options. The printer speaks ZPL and ZPL II, so it drops into existing Zebra label formats, ERP systems and labelling software that already target Zebra printers, and Link-OS support helps with remote management.
Who the ZT230 suits
The ZT230 sits between desktop printers and heavy industrial machines. It handles full 203 mm label rolls and 450 m ribbons, so operators change supplies far less often than on a desktop unit, yet the cabinet remains compact enough for a packing bench or a shelf beside a production line.
Choosing a refurbished Zebra ZT230 gives teams this industrial capacity while keeping the familiar ZPL workflow used by most Zebra fleets. It is a sensible upgrade for sites that are wearing out desktop printers on high daily volumes, or a like-for-like spare for an existing ZT200 series line.
Setup and care tips
Load labels from the side onto the media hanger, thread them under the printhead and guide, then fit the ribbon with the ink side facing out. Choose a ribbon slightly wider than your labels to protect the head. Run media and ribbon calibration from the front panel whenever you change stock.
Clean the printhead with a 99% isopropyl alcohol pen at each ribbon change and wipe the platen roller at the same time. Use compressed air to clear label dust from the media path every few weeks in dusty environments.
Start with a moderate darkness setting and only raise it if barcodes look light. Excess heat shortens printhead life and can smear resin-rich ribbons.
Not sure the Refurbished Zebra ZT230 is the right choice for your setup? Send us your model number and we will confirm it before you order.
Every Refurbished Zebra ZT230 we ship is checked against its listing details before it leaves our warehouse.
Frequently asked questions
Can the refurbished Zebra ZT230 print without a ribbon?
Yes. It is a thermal transfer printer that also runs direct thermal labels, which need no ribbon.
Is this printer new?
No. It is a refurbished unit, offering industrial performance without buying a new machine.
What size labels can it print?
Media from 19.4 to 114 mm wide is supported, with a 104 mm maximum print width, so 100 mm wide shipping labels suit a refurbished Zebra ZT230 well.
Reviews
There are no reviews yet