Made by Brother for its QL label printers, DK-22606 62mm yellow film tape handles warning, caution and safety labels with sharp, consistent print. The ten-roll pack is built for offices and warehouses that print every day. The film face stands up to moisture and handling.
Key details
- Brother code: DK-22606
- Label type: Continuous film
- Print colour: Black on Yellow
- Roll size: 62mm wide x 15.24m long
- Print method: Direct thermal – no ink, toner or ribbon
- Pack contents: 10 x DK-22606 rolls (152.4m in total)
- Genuine Brother product
Suits the following printers
QL-1050, QL-1050N, QL-1060, QL-1060N, QL-110, QL-1100, QL-1110NWB, QL-500, QL-500W, QL-550, QL-570, QL-580N, QL-650TD, QL-700, QL-720NW, QL-800, QL-810W, QL-820NWB
Good to know
Is the Brother DK-22606 10 Pack genuine?
Yes. The Brother DK-22606 10 Pack is a genuine Brother product and arrives new in its original packaging.
Will barcodes printed on DK-22606 scan reliably?
Black thermal print on a yellow background gives the strong contrast scanners need. Print at the size your barcode type recommends and test one label before a big run.
Can I print red on DK-22606?
No, this roll prints black only. Red printing needs the DK-22251 two-colour roll and a QL model that supports two-colour printing.
How to load the Brother DK-22606 10 Pack
- Turn the printer off and open the roll compartment cover.
- Remove the empty spool or the old roll.
- Fit the new roll so the label end feeds from the bottom, and seat the spool arms in the guides on each side.
- Feed the end of the labels into the slot until it stops, close the cover and turn the printer on. It will feed and trim the leading edge automatically.
Printing tips
Make sure the label size set in your software matches the roll you have loaded. If the printer reports an error after a roll change, open the cover, reseat the roll and close it again. Stored this way, an unopened Brother DK-22606 10 Pack stays ready to print whenever you need it.
Storage and handling
Store label rolls in a cool, dry place away from direct sunlight and heat. Thermal labels can darken if they are left in the sun or near a heater, so keep spares in their packaging until you need them.
Delivery, returns and support
Orders are packed within 1–2 business days and sent with tracking to every Australian state for a flat $19.99 delivery fee. Change your mind? Let us know within 30 days of delivery under our returns policy, and faulty items are covered by Australian Consumer Law. Not sure this is the right part for your machine? Send us your printer model and we will confirm before you order.













Reviews
There are no reviews yet