The Wavlink WN901G1 is an IP67 outdoor 90W gigabit PoE extender that pushes both data and power further than a standard 100m Ethernet run. With one PoE input and one PoE output, it supports IEEE 802.3af/at/bt devices up to 90W and full 10/100/1000Mbps speeds. Its die-cast aluminium housing and 6kV lightning protection suit security cameras, wireless access points and other remote outdoor devices.

Standard Ethernet tops out at 100m per run, which is often not far enough to reach a gate camera, a far shed or an outdoor access point. Installing power at the far end is costly. The Wavlink WN901G1 sits mid-run and is itself powered by the incoming PoE, then passes data and power on to the next device, with no local power outlet needed. Up to three extenders can be cascaded for longer distances. The IP67 sealed housing and wide -40°C to 50°C operating range let you mount it outdoors in exposed locations.
Who is the Wavlink WN901G1 for?
The Wavlink WN901G1 is aimed at installers and property owners setting up security monitoring, smart agriculture, industrial parks, warehouses and large residential blocks. A typical setup runs a cable from a PoE switch or injector to the extender's PoE input, then a second cable from its output to a PTZ camera, IP camera or outdoor wireless access point. Use Cat6 or better for gigabit links of up to 100m per segment, or Cat5e for slower 10/100Mbps links over longer runs. Feed 4-8mm diameter cables through the nylon waterproof joints to keep the housing sealed.
Wavlink WN901G1 key features
- Up to 90W PoE pass-through: Supports IEEE 802.3af/at/bt power at up to 90W in and out, enough for high-power devices such as PTZ cameras and outdoor access points. It also accepts passive DC 44-57V input up to 120W.
- Gigabit Ethernet speed: Full 10/100/1000Mbps ports with 4Gbps bandwidth and 2.88Mpps packet forwarding keep high-resolution camera streams and wireless backhaul running without a bottleneck.
- Extends your cable run: Each segment reaches 100m at gigabit speed on Cat6, 150m at 100Mbps or 200m at 10Mbps on Cat5e. Cascade up to three extenders for longer outdoor runs.
- IP67 aluminium housing: A die-cast aluminium body with nylon waterproof joints is dustproof, waterproof and impact resistant, rated for -40°C to 50°C operation in harsh outdoor or indoor environments.
- 6kV lightning protection: Built-in 6kV (8/20us) lightning protection helps safeguard the extender and connected equipment on long exposed outdoor cable runs, where surges are more likely.
- Simple 1-in 1-out design: A straightforward one-in, one-out layout: connect the PoE source to the input port and your camera or access point to the output, with two power and two network LEDs showing link status at a glance.
Wavlink WN901G1 specifications
| Model | WL-WN901G1 |
|---|---|
| Ports | 1 x 10/100/1000Mbps RJ45 PoE input, 1 x 10/100/1000Mbps RJ45 PoE output |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af/at/bt |
| PoE input | IEEE 802.3af/at/bt up to 90W; passive DC 44-57V up to 120W |
| PoE output | IEEE 802.3af/at/bt up to 90W |
| Distance per segment | 10BASE-T 200m (Cat5e), 100BASE-TX 150m (Cat5e), 1000BASE-T 100m (Cat6) |
| Cascading | Up to three extenders |
| Bandwidth / forwarding | 4Gbps, 2.88Mpps, 2K MAC table |
| Lightning protection | 6kV 8/20us |
| Waterproof grade | IP67 |
| Cable diameter | 4-8mm |
| Material | Die-cast aluminium body, nylon waterproof joints |
| LEDs | 2 x power status, 2 x network connection |
| Operating temperature | -40°C to 50°C, 5-90% RH non-condensing |
Full technical details are available on the official Wavlink product page.
What’s in the box with the Wavlink WN901G1
- 1 x Wavlink WN901G1 outdoor PoE extender
- Cables, accessories and quick start guide as supplied by Wavlink
Wavlink WN901G1 FAQs
Does the Wavlink WN901G1 need its own power supply?
No. It draws power from the PoE switch or injector feeding its input port and passes power and data to the device on its output port. Make sure the PoE source supplies enough power for both the extender and the end device.
How far can I extend with the Wavlink WN901G1?
Each cable segment reaches up to 100m at gigabit speed on Cat6, 150m at 100Mbps or 200m at 10Mbps on Cat5e. Wavlink states up to three extenders can be cascaded for longer runs, with total reach depending on link speed and cable.
Which devices can it power?
It is compatible with IEEE 802.3af, 802.3at and 802.3bt PoE devices up to 90W, including IP and PTZ security cameras and outdoor wireless access points. It also accepts a passive DC 44-57V input of up to 120W.
Can it be installed outdoors?
Yes. It has an IP67 dustproof and waterproof rating, a die-cast aluminium body, nylon waterproof cable joints and 6kV lightning protection, and works from -40°C to 50°C. It is also suitable for indoor spaces such as warehouses, server rooms, garages and attics.
Why buy the Wavlink WN901G1 from The Print Cartridge Shop
We are an Australian online store, and every Wavlink WN901G1 we sell is a genuine Wavlink product. Orders are packed within 1–2 business days and sent with tracking to every Australian state under our shipping policy. You can return a change-of-mind purchase within 30 days under our returns policy, and faulty items are covered by the Australian Consumer Law.
Browse more Wavlink network switches or see all products from the Wavlink brand. Not sure the Wavlink WN901G1 suits your setup? Contact our team and we will help you check before you order.






















Reviews
There are no reviews yet