The Wavlink WN588HA2 is an AC1200 dual band outdoor access point, also known as the AERIAL HD8S, built to bring WiFi to yards, farms and open sites. It combines 300Mbps on 2.4GHz with 867Mbps on 5GHz, four detachable 7dBi omnidirectional antennas, a Gigabit WAN/LAN port with PoE input and an IP67 waterproof enclosure rated from -40 to 50 °C.

Indoor routers rarely reach far past the back door, and running mains power to a shed, paddock or carport is often impractical. The Wavlink WN588HA2 solves both problems: it takes power and data over one Ethernet cable using 802.3at/af Active PoE or Passive PoE, and its four 7dBi antennas with a built-in PA and LNA amplifier spread signal 360 degrees, with an outdoor range of up to 1000 metres depending on the environment. The IP67 case, 15kV ESD protection and 6kV lightning protection help it keep running through rain, wind and storms.
Who is the Wavlink WN588HA2 for?
The Wavlink WN588HA2 suits rural properties, farms, estates, large gardens, caravan and camping grounds, and industrial yards that need WiFi outdoors. A typical setup runs a single Ethernet cable from your indoor router through a PoE injector to the access point, which is then fixed to a pole or a wall under the eaves. Keep the PoE injector indoors, as Wavlink notes it is not waterproof. Choose AP mode to extend your wired network, Repeater mode to relay an existing signal, or the Mesh modes to join it with other Everything Mesh devices under one network name and password.
Wavlink WN588HA2 key features
- AC1200 dual band WiFi: Combined speeds up to 1200Mbps, with 300Mbps on the 2.4GHz band for range and 867Mbps on the 5GHz band for faster devices, using the IEEE 802.11ac/n/g/b standards.
- Four 7dBi detachable antennas: Two 7dBi antennas for 5GHz and two for 2.4GHz give 360 degree omnidirectional coverage, backed by a high-power PA and LNA amplifier with up to 28dBm transmit power on each band.
- IP67 weatherproof build: The rugged sealed case is rated IP67 against water and dust, adds 15kV ESD and 6kV lightning protection, and operates from -40 to 50 °C for year-round outdoor use.
- Active and Passive PoE: Power the Wavlink WN588HA2 over the same cable as its data using 802.3at/af Active PoE or Passive PoE, so it can be installed where there is no power point nearby.
- Everything Mesh and four modes: Works in AP, Repeater, Mesh Router or Mesh Extender mode. Everything Mesh links compatible Wavlink devices so you can roam outdoors and indoors on one SSID and password.
- Fat AP and Fit AP management: Run it standalone in Fat AP mode, or in Fit AP mode with an optional Wavlink AC controller for central management. Advanced settings include parental control, QoS and VLAN.
Wavlink WN588HA2 specifications
| Model | WL-WN588HA2 |
|---|---|
| Wireless standard | IEEE 802.11b/g/n/ac, 2.4GHz and 5GHz |
| WiFi speed | 2.4GHz 300Mbps + 5GHz 867Mbps (AC1200) |
| Antennas | 4 x 7dBi detachable omnidirectional (2 x 2.4GHz, 2 x 5GHz) |
| Transmit power | 2.4GHz 28dBm max, 5GHz 28dBm max |
| Ports | 1 x 10/100/1000Mbps WAN/LAN port (PoE) |
| Power | 802.3at/af Active PoE (DC 48V) or Passive PoE (DC 54V/0.3A) |
| Outdoor range | Up to 1000 metres (varies with environment) |
| Operating modes | AP, Repeater (WISP / bridge), Mesh Router, Mesh Extender; Fat AP / Fit AP |
| Wireless security | WPA2-PSK, WPA3-SAE/WPA2-PSK mixed and more |
| Protection | IP67, 15kV ESD, 6kV lightning protection |
| Chipset / memory | MT7621A + MT7613B + MT7603E, 16MB flash, 128MB DDR |
| Dimensions | 172.7 x 169.6 x 56.5 mm |
| Operating temperature | -40 to 50 °C, 10% to 90% humidity non-condensing |
Full technical details are available on the official Wavlink product page.
What’s in the box with the Wavlink WN588HA2
- 1 x Wavlink WN588HA2 outdoor WiFi access point
- Cables, accessories and quick start guide as supplied by Wavlink
Wavlink WN588HA2 FAQs
How is the Wavlink WN588HA2 powered?
It is powered over Ethernet through its Gigabit WAN/LAN port. It accepts 802.3at/af Active PoE at 48V or Passive PoE at 54V. Wavlink notes the PoE converter is not waterproof, so keep the injector inside or in a sheltered, dry enclosure.
What range can the Wavlink WN588HA2 cover outdoors?
Wavlink rates it for up to 1000 metres outdoors, using four 7dBi omnidirectional antennas and a high-power amplifier. Real range depends on the environment, so trees, buildings, hills and interference will reduce it. Mounting it high with a clear line of sight gives the best results.
Can it join a mesh network with my existing router?
It supports Wavlink Everything Mesh in Mesh Router and Mesh Extender modes, so it can form a mesh with other Wavlink devices that support Everything Mesh. For other brands of router, use AP mode over Ethernet or Repeater mode instead.
How can I mount it?
It can be pole mounted in gardens, yards or roadside areas, or wall mounted under eaves, on balconies or against a wall. Both methods let you adjust the angle to avoid obstructions and point the signal where you need it most.
Why buy the Wavlink WN588HA2 from The Print Cartridge Shop
We are an Australian online store, and every Wavlink WN588HA2 we sell is a genuine Wavlink product. Orders are packed within 1–2 business days and sent with tracking to every Australian state under our shipping policy. You can return a change-of-mind purchase within 30 days under our returns policy, and faulty items are covered by the Australian Consumer Law.
Browse more Wavlink WiFi range extenders or see all products from the Wavlink brand. Not sure the Wavlink WN588HA2 suits your setup? Contact our team and we will help you check before you order.






















Reviews
There are no reviews yet