The Wavlink WN573HX3 (AERIAL HD9) is an AX3000 WiFi 6 dual-band outdoor access point that spreads fast wireless across yards, farms, campsites and outdoor workspaces. It delivers 573Mbps on 2.4GHz and 2402Mbps on 5GHz through four 8dBi omnidirectional fiberglass antennas backed by two high-power amplifiers. Power and data share one Ethernet cable, and the IP67 enclosure works from -30°C to 70°C.

An indoor router struggles to cover a backyard, pool area, shed or paddock, and outdoor gear has to cope with sun, rain and storms. The Wavlink WN573HX3 is built for exactly that, with an IP67 dustproof and waterproof case, 15kV ESD and 6kV lightning protection, and wind-resistant fiberglass antennas. Its omnidirectional coverage reaches all around the mounting point, and WiFi 6 MU-MIMO and beamforming let up to 128 devices share the connection. Running on PoE means you only need one cable, even where there is no power outlet.
Who is the Wavlink WN573HX3 for?
The Wavlink WN573HX3 is ideal for homeowners with large blocks, farms, caravan parks, schools, hospitality venues and anyone streaming or working outdoors. A typical setup puts the PoE converter indoors near your router, then runs a CAT5e or better cable of up to 100m to the access point, mounted on a wall or post 2-3 metres above the ground. Use AP mode to turn a wired connection into WiFi, range extender mode to boost an existing network, or mesh mode to join a compatible Wavlink system under one network name.
Wavlink WN573HX3 key features
- AX3000 WiFi 6 dual-band: 573Mbps on 2.4GHz suits browsing and wider coverage, while 2402Mbps on 5GHz handles 4K streaming and gaming, for an aggregated speed of up to 3000Mbps with less interference and congestion.
- Four 8dBi fiberglass antennas: Two 5GHz and two 2.4GHz detachable omnidirectional antennas sit in tough fiberglass tubes that resist wind and corrosion, giving precise performance and a long service life outdoors.
- Dual high-power amplifiers: A power amplifier boosts output while a low-noise amplifier reduces interference, improving range and penetration so phones and laptops further from the unit hold a stronger signal.
- Built for harsh weather: IP67 waterproof and dustproof housing, 15kV ESD and 6kV lightning protection, and an operating range of -30°C to 70°C keep it working through storms, snow, heat and strong wind.
- Active or passive PoE: Supports 802.3af/at active PoE and passive PoE through its gigabit WAN/LAN port. Use CAT5e or better cable up to 100m and install the PoE converter indoors, as it is not waterproof.
- Mesh and multiple modes: Works as an AP, range extender, mesh router or mesh extender. In mesh mode it links with the Wavlink WN586X3, WN572HP3 (latest firmware) and other WN573HX3 units for seamless roaming.
Wavlink WN573HX3 specifications
| Model | WL-WN573HX3 (AERIAL HD9) |
|---|---|
| Wireless standard | IEEE 802.11ax/ac/a/n/g/b |
| Frequency bands and speed | 2.4GHz 573Mbps + 5GHz 2402Mbps (AX3000) |
| Antennas | 2 x 8dBi 5GHz + 2 x 8dBi 2.4GHz detachable omnidirectional fiberglass, 40cm |
| Ethernet | 1 x gigabit WAN/LAN port |
| Power | 802.3af/at active PoE or passive PoE |
| Working modes | AP, Range Extender, Mesh Router, Mesh Extender |
| Wireless security | Open, WPA2-PSK, WPA2/WPA3 mixed |
| Max devices | Up to 128 |
| Protection | IP67, 15kV ESD, 6kV lightning protection |
| Operating temperature | -30°C to 70°C |
| Product size | 24 x 24 x 7 cm (without antennas) |
| Weight | 1109g (without antennas) |
| LEDs | Pair/Reset (blue), PoE converter status (green) |
Full technical details are available on the official Wavlink product page.
What’s in the box with the Wavlink WN573HX3
- 1 x Wavlink WN573HX3 AX3000 WiFi 6 outdoor access point
- 4 x Omnidirectional antennas
- 4 x Cable ties
- 1 x Ethernet cable connector
- 1 x Wrench
- 2 x Silicone pads
- Several screws
- 1 x Quick installation guide
- Passive PoE kit (optional, depending on version): 1 x 54V power adapter, 1 x PoE converter, 1 x Ethernet cable
Wavlink WN573HX3 FAQs
What range does the Wavlink WN573HX3 cover?
With no obstacles between the unit and the target area, Wavlink says the 5GHz signal reaches about 300m and the 2.4GHz signal about 100m. Trees, walls and buildings reduce this, so mount it 2-3 metres above the ground with a clear view of where you need coverage.
Which devices can the Wavlink WN573HX3 mesh with?
In mesh mode it supports the Wavlink WN586X3, WN572HP3 (with the latest firmware) and other WN573HX3 units. It cannot form a mesh with routers from other brands, but works behind any router in AP mode or as a wireless range extender.
Can I power it from a PoE switch or solar?
Yes. Any switch supporting 802.3af or 802.3at PoE should work, and Wavlink notes it can run from a solar battery system supplying DC 48-54V. It can only be powered over PoE, so even in repeater mode it needs a cable to the PoE source.
Will it work with Starlink?
Yes. In repeater mode it connects wirelessly to the Starlink router, and in router or AP mode you connect it by Ethernet. It cannot repeat networks with a captive portal login. To reach the settings, open http://waplogin.link or http://192.168.30.1.
Why buy the Wavlink WN573HX3 from The Print Cartridge Shop
We are an Australian online store, and every Wavlink WN573HX3 we sell is a genuine Wavlink product. Orders are packed within 1–2 business days and sent with tracking to every Australian state under our shipping policy. You can return a change-of-mind purchase within 30 days under our returns policy, and faulty items are covered by the Australian Consumer Law.
Browse more Wavlink wireless networking equipment or see all products from the Wavlink brand. Not sure the Wavlink WN573HX3 suits your setup? Contact our team and we will help you check before you order.






















Reviews
There are no reviews yet