The Wavlink WN573HX1-B (Greenwood-6-1800P) is a WiFi 6 AX1800 dual-band outdoor mesh router, access point and repeater for spreading fast wireless around your yard, farm or campsite. Four 8dBi omnidirectional fiberglass antennas and two built-in high-power amplifiers give all-round coverage of about 200-300m, while the IP67 enclosure, 15kV ESD and 6kV lightning protection keep it running in rain, snow and storms.

Most indoor routers leave the backyard, pool, shed or carport with patchy WiFi. The Wavlink WN573HX1-B is designed to sit outside and cover those areas in every direction, with omnidirectional antennas rather than a narrow beam. Because it runs on Power over Ethernet, you only need one cable to the mounting spot, even where there is no power outlet. Mesh mode lets it join compatible Wavlink devices with one network name and password, so phones move between indoor and outdoor coverage without dropping out.
Who is the Wavlink WN573HX1-B for?
The Wavlink WN573HX1-B suits households with large yards, rural blocks, holiday parks, cafes with outdoor seating and small businesses that need WiFi across an open area. A typical install places the included passive PoE converter indoors near your router, then runs a CAT5e or better cable up to 100m to the unit, mounted on a wall or post 2-3 metres above the ground. Choose router or AP mode to convert a wired connection to WiFi, repeater mode to extend an existing network wirelessly, or mesh mode for seamless roaming.
Wavlink WN573HX1-B key features
- WiFi 6 AX1800 dual-band: Dual-band 2.4GHz and 5GHz WiFi 6 reduces interference and congestion. Use 2.4GHz for browsing and social media at range, and 5GHz for video streaming or gaming closer to the unit.
- Four 8dBi fiberglass antennas: Detachable 8dBi omnidirectional antennas in tough fiberglass tubes resist strong wind and corrosion and give a long service life, spreading coverage of around 200-300m in all directions.
- High-power amplifiers: Two integrated signal boosters combine a power amplifier to raise output with a low-noise amplifier to cut interference, improving range and penetration for outdoor clients.
- IP67 with lightning protection: An IP67 dustproof and waterproof enclosure plus 15kV ESD and 6kV lightning protection let it keep working through rain, snow, wind, sandstorms and thunderstorms.
- Active or passive PoE: Supports 802.3af/at active PoE and passive PoE over a single Ethernet cable, with a passive PoE converter included. Install the converter indoors, as it is not waterproof.
- Mesh, AP, router and repeater: Works in mesh, AP, router, repeater and AP+repeater modes, with MU-MIMO and beamforming for up to 128 connected devices and WPA2/WPA3 mixed security.
Wavlink WN573HX1-B specifications
| Model | WL-WN573HX1-B (Greenwood-6-1800P) |
|---|---|
| Wireless standard | IEEE 802.11ax/ac/a/n/g/b |
| WiFi class | AX1800 dual-band 2.4GHz + 5GHz |
| Antennas | 4 x 8dBi detachable omnidirectional fiberglass antennas, 40cm |
| Coverage | About 200-300m |
| Wireless security | WPA2-PSK, WPA2/WPA3 mixed |
| Power | 802.3af/at active PoE or passive PoE (passive PoE converter included) |
| Working modes | Mesh, AP, Router, Repeater, AP+Repeater |
| Protection | IP67 enclosure, 15kV ESD, 6kV lightning protection |
| Product size | 24 x 24 x 7 cm (without antennas) |
| PoE converter size | 4.4 x 3.7 x 2.2 cm |
| Cable lengths | Ethernet cable 100cm; power adapter cable 130cm |
| Weight | 1109g (without antennas) |
| LEDs | Pair/Reset (blue), PoE converter status (green) |
Full technical details are available on the official Wavlink product page.
What’s in the box with the Wavlink WN573HX1-B
- 1 x Wavlink WN573HX1-B WiFi 6 outdoor mesh router
- Cables, accessories and quick start guide as supplied by Wavlink
Wavlink WN573HX1-B FAQs
How far does the Wavlink WN573HX1-B reach?
Wavlink quotes stable coverage of about 200-300m. With no obstacles, phones can connect at about 300m on 5GHz and about 100m on 2.4GHz. Walls, trees and buildings shorten this, so mount it 2-3 metres above the ground with a clear view of the area.
Can the Wavlink WN573HX1-B mesh with my current router?
Only if that router is a Wavlink model supporting Everything Mesh technology; it will not mesh with other brands. You can still use it in AP mode behind any router via Ethernet, or in repeater mode to extend any WiFi without a captive portal.
How do I power it?
It runs only on Power over Ethernet. Use the included passive PoE converter, an 802.3af/at PoE switch, or a solar battery system supplying DC 48-54V. Keep the converter and adapter indoors because they are not waterproof, and use CAT5e or better cable under 100m.
How do I set it up and reset it?
Connect to its WiFi and open http://waplogin.link or http://192.168.30.1 in a browser to reach the management page. To return to factory settings, hold the reset button for six seconds while the unit is powered on. Wavlink also recommends connecting the ground wire.
Why buy the Wavlink WN573HX1-B from The Print Cartridge Shop
We are an Australian online store, and every Wavlink WN573HX1-B we sell is a genuine Wavlink product. Orders are packed within 1–2 business days and sent with tracking to every Australian state under our shipping policy. You can return a change-of-mind purchase within 30 days under our returns policy, and faulty items are covered by the Australian Consumer Law.
Browse more Wavlink wireless networking equipment or see all products from the Wavlink brand. Not sure the Wavlink WN573HX1-B suits your setup? Contact our team and we will help you check before you order.






















Reviews
There are no reviews yet