The Wavlink WN572HG3 is an AC1200 dual band outdoor WiFi extender designed for long-distance wireless and CPE use around homes and small business sites. It reaches up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, using four 7dBi omnidirectional antennas and a high power amplifier. It works in router, AP or repeater mode, with one Gigabit WAN port, one 10/100Mbps LAN port and passive PoE support.

When your indoor router cannot reach a workshop, patio, paddock or second building, devices drop out or crawl along. The Wavlink WN572HG3 is built to send a stronger signal outdoors, with a high power amplifier and four high-gain antennas helping eliminate WiFi dead zones. Its MT7621A chip and MU-MIMO let it serve several devices on the same band at once, keeping around 64 to 96 devices connected. Passive PoE means one cable carries power and data, and the weatherproof case with built-in lightning protection is made for harsh outdoor conditions.
Who is the Wavlink WN572HG3 for?
This extender suits rural homes, small business offices, farms and large properties with outdoor networking needs. A typical Wavlink WN572HG3 setup mounts the unit high on a pole or wall, with the antennas around 2 metres above the roof line or in an open spot, and runs a network cable to the PoE adapter indoors. Use router or AP mode with a cable from your main router, or repeater mode to extend an existing network wirelessly, choosing a source signal above 70% strength for the most reliable connection.
Wavlink WN572HG3 key features
- AC1200 dual band: Complies with IEEE 802.11ac/a/b/g/n, with up to 867Mbps on 5GHz and 300Mbps on 2.4GHz for HD streaming, online gaming and other bandwidth-heavy outdoor use.
- Four 7dBi antennas: Four omnidirectional 7dBi antennas and a high power amplifier strengthen signal transmission and help remove WiFi dead zones across yards and outdoor work areas.
- MT7621A chip with MU-MIMO: The upgraded MT7621A chip and MU-MIMO let the extender talk to several devices on the same band at once, keeping roughly 64 to 96 devices connected.
- Router, AP and repeater modes: Run it as a router, convert a wired connection to WiFi in AP mode, or extend an existing wireless network in repeater mode to suit your site.
- Gigabit WAN port: One 10/100/1000Mbps WAN port provides a fast wired uplink, with a 10/100Mbps LAN port for connecting a wired device such as a camera or computer.
- Weatherproof with passive PoE: A weatherproof case with built-in lightning protection handles harsh outdoor conditions, and passive PoE support allows flexible installation away from power outlets.
Wavlink WN572HG3 specifications
| Model | WL-WN572HG3 |
|---|---|
| Wireless standard | IEEE 802.11ac/a/b/g/n |
| Frequency band / speed | 5GHz 867Mbps + 2.4GHz 300Mbps (AC1200) |
| Chipset | MT7621A |
| Antennas | 4 x 7dBi omnidirectional |
| Ports | 1 x 10/100/1000Mbps WAN, 1 x 10/100Mbps LAN |
| Modes | Router, AP, Repeater |
| Connected devices | Approx. 64 to 96 |
| Power | Passive PoE |
| Protection | Weatherproof case, built-in lightning protection |
Full technical details are available on the official Wavlink product page.
What’s in the box with the Wavlink WN572HG3
- 1 x Wavlink WN572HG3 outdoor WiFi range extender
- Cables, accessories and quick start guide as supplied by Wavlink
Wavlink WN572HG3 FAQs
What modes does the Wavlink WN572HG3 support?
It supports router, access point and repeater modes. Use router or AP mode when you can run a network cable from your main router, or repeater mode to pick up and extend an existing wireless network without a cable to the router.
What ports does the Wavlink WN572HG3 have?
It has one 10/100/1000Mbps Gigabit WAN port and one 10/100Mbps LAN port. The closely related WN572HP3 has two Gigabit ports and mesh extender mode instead of router mode, so choose the model that matches your setup.
Where should I install it?
Mount it high, with the antennas around 2 metres above the roof or in a high, open place for better reception. In repeater mode, select a source WiFi network with a signal strength above 70% for the most reliable connection.
How many devices can connect?
With its MT7621A chip, dual bands and MU-MIMO, it can keep roughly 64 to 96 devices connected at the same time. Actual performance depends on how heavily each device uses the network and on outdoor conditions.
Why buy the Wavlink WN572HG3 from The Print Cartridge Shop
We are an Australian online store, and every Wavlink WN572HG3 we sell is a genuine Wavlink product. Orders are packed within 1–2 business days and sent with tracking to every Australian state under our shipping policy. You can return a change-of-mind purchase within 30 days under our returns policy, and faulty items are covered by the Australian Consumer Law.
Browse more Wavlink wireless networking equipment or see all products from the Wavlink brand. Not sure the Wavlink WN572HG3 suits your setup? Contact our team and we will help you check before you order.




















Reviews
There are no reviews yet