The Wavlink WN530BE2 is a BE5100 dual band Wi-Fi 7 router, known as the Skyline Stream 5, for homes that want faster wireless and a quicker wired uplink. It delivers up to 688Mbps on 2.4GHz and 4323Mbps on 5GHz, and pairs a 2.5 Gigabit WAN port with four Gigabit LAN ports, five 5dBi antennas and Wavlink Everything Mesh.

If your internet plan or home network has outgrown an older router, the Wavlink WN530BE2 removes the bottlenecks at both ends. The 2.5G WAN port means the connection from your modem or ONT is not capped at one gigabit, while Wi-Fi 7 with 4096-QAM, OFDMA, uplink/downlink MU-MIMO and dual-band aggregation moves more data to more devices at once. Beamforming antennas help push signal to where you use it, and Everything Mesh lets you grow coverage later with compatible Wavlink units.
Who is the Wavlink WN530BE2 for?
The Wavlink WN530BE2 suits households with fast internet plans, busy family homes with many streaming and gaming devices, and home offices with wired desktops or network storage. A typical setup runs an Ethernet cable from your NBN modem or ONT to the 2.5G WAN port, with a PC, smart TV, console and NAS plugged into the four Gigabit LAN ports. Finish setup in the WavRouter app or at 192.168.20.1, then add guest WiFi, parental controls, QoS or website blocking as needed, or run it in AP or Repeater mode instead.
Wavlink WN530BE2 key features
- BE5100 Wi-Fi 7 speeds: Up to 688Mbps on the 2.4GHz band and 4323Mbps on the 5GHz band, for a combined BE5100 rating that gives compatible Wi-Fi 7 devices much more headroom.
- 2.5G WAN port: A 100/1000/2500Mbps WAN port lets the router take full advantage of internet connections and upstream equipment faster than one gigabit, avoiding a wired bottleneck.
- Four Gigabit LAN ports: Connect a desktop PC, smart TV, games console and network storage directly through four 10/100/1000Mbps LAN ports for stable, low-latency wired connections.
- Five 5dBi antennas with beamforming: Two 2.4GHz and three 5GHz omnidirectional 5dBi antennas, with beamforming, improve signal strength, reception and sensitivity for steadier links around the home.
- 4096-QAM, OFDMA and MU-MIMO: Wi-Fi 7 4096-QAM, OFDMA, uplink/downlink MU-MIMO and dual-band aggregation help the Wavlink WN530BE2 serve many devices efficiently at the same time.
- Everything Mesh and easy management: Join compatible Wavlink Everything Mesh devices for whole-home roaming, and manage everything through the WavRouter app or web interface with guest WiFi, parental control, QoS, VLAN and IPv6.
Wavlink WN530BE2 specifications
| Model | WL-WN530BE2-A |
|---|---|
| Wireless standard | Wi-Fi 7, IEEE 802.11b/g/n/ac/ax/be |
| WiFi speed | 2.4GHz 688Mbps + 5GHz 4323Mbps (BE5100) |
| Wi-Fi technology | 4096-QAM, OFDMA, UL/DL MU-MIMO, beamforming, dual-band aggregation |
| WAN port | 1 x 100/1000/2500Mbps (2.5G) |
| LAN ports | 4 x 10/100/1000Mbps |
| Antennas | 2 x 2.4GHz 5dBi + 3 x 5GHz 5dBi omnidirectional |
| Transmit power | 2.4GHz 23dBm max, 5GHz 23dBm max |
| Wireless security | WPA2-PSK, WPA/WPA2 mixed, WPA3-SAE/WPA2-PSK, WPA/WPA2-Enterprise |
| WAN type | PPPoE, Dynamic IP, Static IP |
| Memory | 128MB SPI-NAND flash, 512MB DDR3 RAM |
| Power supply | DC 12V/1A, input 100-240V AC 50/60Hz |
| Buttons / LED | 1 x Pair & Reset, 1 x SYS LED |
| Operating temperature | 0 to 40 °C |
Full technical details are available on the official Wavlink product page.
What’s in the box with the Wavlink WN530BE2
- 1 x Wavlink WN530BE2 BE5100 Wi-Fi 7 router
- Cables, accessories and quick start guide as supplied by Wavlink
Wavlink WN530BE2 FAQs
Can the Wavlink WN530BE2 replace my modem?
No. It is a router, not a modem. Connect its 2.5G WAN port to your existing NBN modem, ONT or gateway with an Ethernet cable, and it will share that connection over Wi-Fi 7 and its four Gigabit LAN ports.
How do I set up the Wavlink WN530BE2?
After connecting it to your modem and powering it on, join its WiFi and use the WavRouter app, or type 192.168.20.1 into your browser's address bar. If the login page does not load, disable VPNs and mobile data and try again.
Will it create a mesh with my other brand of router?
No. Mesh networking only works with Wavlink devices that support Everything Mesh technology. You can still use it alongside another brand by running it in AP mode over Ethernet or in Repeater mode.
How do I factory reset the router?
With the router powered on, press and hold the Pair & Reset button for about six seconds. This clears your settings, including a forgotten admin password, so you can set it up again from scratch.
Why buy the Wavlink WN530BE2 from The Print Cartridge Shop
We are an Australian online store, and every Wavlink WN530BE2 we sell is a genuine Wavlink product. Orders are packed within 1–2 business days and sent with tracking to every Australian state under our shipping policy. You can return a change-of-mind purchase within 30 days under our returns policy, and faulty items are covered by the Australian Consumer Law.
Browse more Wavlink modems and routers or see all products from the Wavlink brand. Not sure the Wavlink WN530BE2 suits your setup? Contact our team and we will help you check before you order.






















Reviews
There are no reviews yet